Fixed leak detection

7 products and services meet your criteria

MGS-402 | MGS-408 : leak detection controllers

The Bacharach MGS-402 and MGS-408 controllers can be used to connect the MGS-400 series and MGS-550 series of sensors to form leak detection units for refrigerants, toxic and combustible gases.

See the product


Stationary leak detector : MGS 400 series

The Bacharach MGS-400 series room controllers are fixed refrigerant leak detectors suitable for all refrigeration systems.

 

Designed to detect refrigerants, toxic and combustible gases, they can detect HFO/blends (HFO-HFC) / HFC / R-290 / NH3 / CO2, ensuring people safety while reducing leaks.

 

 

See the product


Industrial Refrigerant Gas Leak Detector MGS 550

The Bacharach MGS 550 is a leak detector for refrigerants, toxic gases, combustible gas, and oxygen. It is recommended for
detection of refrigerants for air conditioning and refrigeration installations (chillers, GMS, industrial refrigeration).

See the product


Refrigerant detector for occupied spaces Bacharach MVR-300

The Bacharach MVR-300 is a new refrigerant detector for occupied spaces to enhance safety, legislation compliance and HVAC efficiency.

See the product


DNI -Smart level sensor

With measurements every two to three seconds, the DNI conducts full leak detection, continuously. Tested on a panel of well-adjusted positive and negative installations in superstores and hypermarkets, the DNI permitted a 79% saving in refrigerant compared with traditional detection (Ademe report of February 2011), with a return on investment of less than a year.

In the event of a leak, an alert is triggered and the operator is warned by local alarm and email so that action can be taken as quickly as possible.
Installing a DNI reduces the frequency of leak detection (according to EU Regulation no. 517/2014 Art.4).

See the product


MGS 150

The MGS 150 room controllers have been replaced by a new range: the MGS 400 series and MGS 550 series.

See the product


Calibration kits for HFO / HFC, CO2 / NH3

Cylinders loaded with a non-reactive mixture for calibrating stationary gas detectors designed to detect HCFC/HFC, NH3 and CO2.

See the product