Stationary leak detector : MGS 400 series

Go back

The Bacharach MGS-400 series room controllers are fixed refrigerant leak detectors suitable for all refrigeration systems.

 

Designed to detect refrigerants, toxic and combustible gases, they can detect HFO/blends (HFO-HFC) / HFC / R-290 / NH3 / CO2, ensuring people safety while reducing leaks.

 

 

These detectors comply with current standards (ASHRAE 15, EN 378, CSA-B52). Easy to install and configure, they are efficient and save time and money on equipment and installation.

 

MGS-400 series highlights:

 

  • Connected detectors: The MGS-400 application allows commissioning, maintenance and configuration of the MGS-410, MGS-450 and MGS -60 from a smartphone. Through a Bluetooth connection, it allows you to visualise the measurements in real time, test the outputs and calibrate the detector.

 

  • Built-in audible and visual alarms for refrigeration safety compliance - no additional hardware required.

 

  • Available with a wide range of refrigerants.

 

  • Sensor replacement is simplified with pre-calibrated plug-and-play sensors.

 

 

 

Functionality  MGS-410 MGS-450 MGS-460
IP41    ✔  
IP66  ✔  ✔  ✔
Modbus  ✔  ✔  ✔
3 relays    ✔  ✔
Analogue output    ✔  ✔
Remote sensor      ✔

MGS 400 - mobile app compatible (for set up)

  ✔  ✔  ✔
Probe  1 integrated probe 1 integrated probe
 1 remote probe
Alarm level(s)  1 2 2
MGS-402 compatibility  ✔    
MGS-408 compatibility  ✔ ✔  ✔

 

Our case studies : Stationary leak detector : MGS 400 series 1

COMMERCIAL REFRIGERATION Lincoln Co-op invest in Bacharach MGS400 Series for the early identification of leaks

Linked documents ( 0 )

Product

8259

MGS 410 EC NH3 		+

8260

MGS 410 IR CO2/HC 		+

8261

MGS 410 SC HFC/HFO 		+

8262

MGS 450 EC NH3 		+

8263

MGS 450 IR CO2/HC 		+

8264

MGS 450 SC HFC/HFO 		+

8265

MGS 460 EC NH3 		+

8269

MGS 460 IR CO2/HC 		+

8270

MGS 460 SC HFC/HFO 		+

MGS-402 | MGS-408 : leak detection controllers

The Bacharach MGS-402 and MGS-408 controllers can be used to connect the MGS-400 series and MGS-550 series of sensors to form leak detection units for refrigerants, toxic and combustible gases.

See the product

MGS 150

The MGS 150 room controllers have been replaced by a new range: the MGS 400 series and MGS 550 series.

See the product

Calibration kits for HFO / HFC, CO2 / NH3

Cylinders loaded with a non-reactive mixture for calibrating stationary gas detectors designed to detect HCFC/HFC, NH3 and CO2.

See the product